fbpx

Surgical burs and bone taps

Burs for cylindrical and anatomical implants

Spiral, with external irrigation, used in progression to create the implant site.

The RA018 round pilot bur or the RLO18 cutter create the guide site on the bone ridge for subsequent burs.

 Cylindrical burs are in medical grade steel and have depth markings and stops at fixed heights.

 The burs are treated in DLC (Diamond Like Carbon), this black facing increases the hardness of the bur and improves its resistance to abrasion and chemical aggression.

 The pilot bur is also available in ceramic zirconium, without depth markings.

Attention: while cutting near vital anatomical structures, one must take into account the greater length, variable according to the bur.

RA018Tungsten carbide round pilot bur ø018.

Product Details:

Pilot bur is a small round bur of tungsten carbide; it is used to locate precisely and cut the pilot hole.

The bur is sold in package of three pieces.

RL018 Hard metal drill, ø1.80 mm.

Product Details:

Hard metal drill, ø1.80 mm. for initial opening of the bone crest and subsequent use of bone expanders.

RZB20Zirconia initial bur, ø2.0 mm.

Product Details:

Surgical bur, made in zirconium oxide, with external irrigation, ø2.0 mm., for cylindrical, conical and anatomical implants. 
It is designed for housing a depth-locator (BP2 series).

RMB20 Steel bur, ø2.0 mm.

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø2.0 mm., for cylindrical, conical and anatomical implants.
It is designed for housing a depth-locator (BP2 series).

RMB24Steel bur, ø2.4 mm.

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø2.4 mm., for cylindrical, conical and anatomical implants.
It is designed for housing a depth-locator (BP2 series).

RMB27 Steel bur, ø2.7 mm.

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø2.7 mm., for cylindrical, conical and anatomical implants.
It is designed for housing a depth-locator (BP2 series).

RMB30Steel bur, ø3,0 mm.

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø3,0 mm., for cylindrical, conical and anatomical implants.
It is designed for housing a depth-locator (BP2 series).

RMB33Steel bur, final for SN and W, ø3.3 mm.

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø3.3 mm., for cylindrical and anatomical implants type SN and W.
It is designed for housing a depth-locator (BP3 series).

RMX36 Stainless steel drill, short,  Ø3,60 twist

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø3.6 mm., short.
It is designed for housing a depth-locator (BP3 series).

RMB36Steel bur, intermediate, ø3.6 mm.

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø3.6 mm., intermediate.

It is designed for housing a depth-locator (BP3 series).

RMX42 Stainless steel drill, short,  Ø 420 twist

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø 4,20 mm., short.
It is designed for housing a depth-locator (BP3 series).

RMB42Steel bur, intermediate, ø4,2 mm.

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø4,20 mm., intermediate.
It is designed for housing a depth-locator (BP3 series).

RMX52 Stainless steel drill, short,  Ø 5,20 twist

Product Details:

Surgical bur, made of medical grade steel, with external irrigation, ø5,20 mm., short.
It is designed for housing a depth-locator (BP3 series).

Burs for conical implants

Conical burs, in medical grade steel, externally irrigated, fixed length, to obtain the individual implant profile at the surgical site, fitted with stroke end stops.

The fixed-length conical steel burs provide the correct profile for a single implant to the surgical site, and are equipped with a depth-locator, sold separately.

The burs are treated in DLC (Diamond Like Carbon), this black facing increases the hardness of the bur and improves its resistance to abrasion and chemical aggression.

RL035 Bone crest bur

Product Details:

The bur specifically designed for evening the bone crest in one single pass.

image20

RLC10 Conical stainless steel bur, final for 20L10.

Product Details:

Conical bur, made of medical grade steel, final for implant 20L10.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

RLC11 Conical stainless steel bur, final for 20L11.

Product Details:

Conical bur, made of medical grade steel, final for implant 20L11.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

RLC13 Conical stainless steel bur, final for 20L13.

Product Details:

Conical bur, made of medical grade steel, final for implant 20L13.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

 

RLC15 Conical stainless steel bur, final for 20L15.

Product Details:

Conical bur, made of medical grade steel, final for implant 20L15.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

RCS10Conical stainless steel bur, final for 20SN10.

Product Details:

Conical bur, made of medical grade steel, final for implant 20SN10.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

RCS11 Conical stainless steel bur, final for 20SN11.

Product Details:

Conical bur, made of medical grade steel, final for implant 20SN11.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

RCS13Conical stainless steel bur, final for 20SN13.

Product Details:

Conical bur, made of medical grade steel, final for implant 20SN13.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

RCS15Conical stainless steel bur, final for 20SN15.

Product Details:

Conical bur, made of medical grade steel, final for implant 20SN15.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

RCX10 Conical stainless steel bur, final for 20XL10.

Product Details:

Conical bur, made of medical grade steel, final for implant 20XL10.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

RCX11 Conical stainless steel bur, final for 20XL11.

Product Details:

Conical bur, made of medical grade steel, final for implant 20XL11.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

RCX13 Conical stainless steel bur, final for 20XL13.

Product Details:

Conical bur, made of medical grade steel, final for implant 20XL13.
Bur is not equipped with depth-locator (cod. BRC3), which is sold separately.

ORF O-ring spare for conical drills.

Product Details:

Package of  n. 11 o-ring spares, assorted colours, for conical drills.

Drill stops

Made in medical steel, they are positioned on cylindrical drills to fix the height based on the drilling needs.

BP205Depth stop for drills series RMB2x, stop to 5 mm.

Product Details:

Depth stop in medical steel for drills series RMB2x, stop to 5 mm.

BP208 Depth stop for drills series RMB2x, stop to 8 mm.

Product Details:

Depth stop in medical steel for drills series RMB2x, stop to 8 mm.

BP210Depth stop for drills series RMB2x, stop to 10 mm.

Product Details:

Depth stop in medical steel for drills series RMB2x, stop to 10 mm.

BP211 Depth stop for drills series RMB2x, stop to 11 mm.

Product Details:

Depth stop in medical steel for drills series RMB2x, stop to 11 mm.

BP213 Depth stop for drills series RMB2x, stop to 13 mm.

Product Details:

Depth stop in medical steel for drills series RMB2x, stop to 13 mm.

BP215 Depth stop for drills series RMB2x, stop to 15 mm.

Product Details:

Depth stop in medical steel for drills series RMB2x, stop to 15 mm.

BP308Depth stop for drills series RMB3x, stop to 8 mm.

Product Details:

Depth stop in medical steel for drills series RMB3x, stop to 8 mm.

BP310 Depth stop for drills series RMB3x, stop to 10 mm.

Product Details:

Depth stop in medical steel for drills series RMB3x, stop to 10 mm.

BP311 Depth stop for drills series RMB3x, stop to 11 mm.

Product Details:

Depth stop in medical steel for drills series RMB3x, stop to 11 mm.

BP313 Depth stop for drills series RMB3x, stop to 13 mm.

Product Details:

Depth stop in medical steel for drills series RMB3x, stop to 13 mm.

BP315Depth stop for drills series RMB3x, stop to 15 mm.

Product Details:

Depth stop in medical steel for drills series RMB3x, stop to 15 mm.

BP408Depth stop for drills series RMB4x, stop to 8 mm.

Product Details:

Depth stop in medical steel for drills series RMB4x, stop to 8 mm.

BP410Depth stop for drills series RMB4x, stop to 10 mm.

Product Details:

Depth stop in medical steel for drills series RMB4x, stop to 8 mm.

BP411 Depth stop for drills series RMB4x, stop to 11 mm.

Product Details:

Depth stop in medical steel for drills series RMB4x, stop to 11 mm.

BP413Depth stop for drills series RMB4x, stop to 13 mm.

Product Details:

Depth stop in medical steel for drills series RMB4x, stop to 13 mm.

BP415Depth stop for drills series RMB4x, stop to 15 mm.

Product Details:

Depth stop in medical steel for drills series RMB4x, stop to 15 mm.

BRC1Depth stop for conical drills series RCS.

Product Details:

Depth stop in medical steel for conical drills series RCS and finishing burs AS.

BRC2Depth stop for conical drills.

Product Details:

Depth stop to 8 mm., in medical steel for conical drills series.

KITBPAutoclavable kit with n. 15 drill stop.

Product Details:

Autoclavable kit with n. 15 drill stop for cylindrical drills RMB.

Bone taps for cylindrical and anatomical implants

The medical steel bone taps are used to aid placement in dense cortical bone.

Bone taps for cylindrical implants are available in four different diameters, they have depth markings and a cutting thread lenght of 8 mm.

The head is hexagonal to fit the manual key, ratchet wrench or key with handle.
The laboratory tap, made of stainless steel, is used to clean the internal threads of the castable posts PU after casting.

MA3 Bone tap for anatomical implants Short Neck.

Product Details:

Bone tap in medical steel for anatomical implants Short Neck.

The replacement of worn O-rings is provided with the product code ORM.

MA4Bone tap for anatomical implants Large.

Product Details:

Bone tap in medical steel for anatomical implants Large.

The replacement of worn O-rings is provided with the product code ORM.

MA5Bone tap for anatomical implants Extra Large.

Product Details:

Bone tap in medical steel for anatomical implants Extra Large.

The replacement of worn O-rings is provided with the product code ORM.

MAS2Bone tap for cylindrical implants Mini Short Neck.

Product Details:

Bone tap in medical steel, ø3,30 for cylindrical implants Mini Short Neck.

The replacement of worn O-rings is provided with the product code ORM.

 

MAS3 Bone tap for cylindrical implants Short Neck.

Product Details:

Bone tap in medical steel, ø3,75 for cylindrical implants Short Neck.

The replacement of worn O-rings is provided with the product code ORM.

MAS4 Bone tap for cylindrical implants Mini Large.

Product Details:

Bone tap in medical steel, ø4,50 for cylindrical implants Large.

The replacement of worn O-rings is provided with the product code ORM.

MAS5 Bone tap for cylindrical implants Mini Extra Large.

Product Details:

Bone tap in medical steel, ø5,0 for cylindrical implants Extra Large.

The replacement of worn O-rings is provided with the product code ORM.

 

MASCH1Tap for laboratory.

Product Details:

Tap in hard steel, for laboratory technician.
It recreates the internal threads of the castable abutments after melt.

Bone taps for conical implants

The medical grade titanium bone taps are used to aid placement in dense cortical bone.
Bone taps for conical implants are available in three different diameters and have a fixed lenght.

The head is hexagonal to fit the manual key, ratchet wrench or key with handle.

MS10 Bone tap for conical implants 20SN10.

Product Details:

Bone tap in medical steel, ø3.75 mm., h. 10 mm. for implants 20SN10.

The replacement of O-rings is provided with the product code ORM.

MS11Bone tap for conical implants 20SN11.

Product Details:

Bone tap in medical steel, ø3.75 mm., h. 10 mm. for implants 20SN11.

The replacement of O-rings is provided with the product code ORM.

MS13 Bone tap for conical implants 20SN13.

Product Details:

Bone tap in medical steel, ø3.75 mm., h. 10 mm. for implants 20SN13.

The replacement of O-rings is provided with the product code ORM.

MS15 – Bone taps pro konické implantáty série 20SN15.

Detail produktu:

Bone taps vyrobený z lékařské oceli,  ø3,75 mm., výška 15 mm., pro implantáty 20SN15. Výměna opotřebovaných O-kroužků je dodávána s kódem výrobku ORM.

ML10Bone tap for conical implants 20L10.

Product Details:

Bone tap in medical steel, ø4.50 mm., h. 10 mm. for implants 20L10.

The replacement of O-rings is provided with the product code ORM.

ML11Bone tap for conical implants 20L11.

Product Details:

Bone tap in medical steel, ø4.50 mm., h. 11 mm. for implants 20L11.

The replacement of O-rings is provided with the product code ORM.

ML13 Bone tap for conical implants 20L13.

Product Details:

Bone tap in medical steel, ø4.50 mm., h. 13 mm. for implants 20L13.

The replacement of O-rings is provided with the product code ORM.

ML15Bone tap for conical implants 20L15.

Product Details:

Bone tap in medical steel, ø4.50 mm., h. 15 mm. for implants 20L15.

The replacement of O-rings is provided with the product code ORM.

MX10Bone tap for conical implants 20XL10.

Product Details:

Bone tap in medical steel, ø5.00 mm., h. 10 mm. for implants 20XL10.

The replacement of O-rings is provided with the product code ORM.

MX11Bone tap for conical implants 20XL10.

Product Details:

Bone tap in medical steel, ø5.00 mm., h. 10 mm. for implants 20XL10.

The replacement of O-rings is provided with the product code ORM.

MX13Bone tap for conical implants 20XL10.

Product Details:

Bone tap in medical steel, ø5.00 mm., h. 10 mm. for implants 20XL10.

The replacement of O-rings is provided with the product code ORM.

MX13 – Bone taps pro konické implantáty série 20XL13.

Detail produktu:

Bone taps vyrobený z lékařské oceli,  ø5 mm., výška 13 mm., pro implantáty 20XL13. Výměna opotřebovaných O-kroužků je dodávána s kódem výrobku ORM.

Finishing burs (COUNTERSINKS)

Finishing burs, made in medical steel, are shaped to provide precise sizing at the occlusal end for cylindrical and anatomical implants and to decrease compressive stress on the cortical of the implants.

The countersinks (series AS) are used to obtain the correct housing for the conical neck of implants.

The burs are treated in DLC (Diamond Like Carbon), this black facing increases the hardness of the bur and improves its resistance to abrasion and chemical aggression.

The medical steel bone taps are used to aid placement in dense cortical bone.
Bone taps for cylindrical implants are available in four different diameters, they have depth markings and a cutting thread lenght of 8 mm.

AS2Finishing bur for implant type Mini Short Neck (M)

Product Details:

Finishing bur in medical steel for implant type Mini Short Neck ø3.30 mm.

AS3Finishing bur for implant type Short Neck (SN)

Product Details:

Finishing bur in medical steel for implant type Short Neck ø3.75 mm.

AS4 Finishing bur for implant type Large (L)

Product Details:

Finishing bur in medical steel for implant type Mini Large ø4,50 mm.

AS5Finishing bur for implant type Extra Large (XL)

Product Details:

Finishing bur in medical steel for implant type Exra Large ø 5 mm.

ASW Finishing bur for implant type Wide (W)

Product Details:

Finishing bur in medical steel for implant type Wide ø6 mm.

APSFinishing bur for PS

Product Details:

Finishing bur in medical steel for milling of the cortical bone around the fixture.

It facilitates the positioning of the angled abutments All-on-screw (PS322 and PS330).

Burs-kit

KITFM – Sada vrtáků pro přípravu abutmentov

Detail produktu:

Sada vrtáků pro přípravu abutmentov.Sada obsahuje 2 karbidové wolframové frézy, diamantový vrták v hrubém zrnu (zelený kroužek) a diamantový vrták ve standardním zrnu.

KITRALKit for bony ridge

Detail produktu:

Kit for bony ridge. Use of the kit is indicated in cases of particularly thin crestal bone.

It consists of 4 surgical tungsten carbide drills, round shape, with a diameter of  2.3 – 2.7 to 3.5 and 4.0 mm.